Steam Desuperheaters & Steam Conditioners

Product Features

• Special design for higher pressures and higher temperatures
• The DKH injection cooler works like the DKV type, with controlled nozzle technology (pressure atomization via controlled nozzle technology)
• Spray head with integrated high-performance nozzles and excellent atomization
• No additional control valve required
• Selectable control characteristics for precise temperature control
• Tightly closing metallic seat
• Large permissible water vapor pressure difference delta p up to 100 bar / 1450 PSI
• High control accuracy over the entire control range
• High operational reliability by using simple components, minimal wear and tear
• Excellent control accuracy over the entire control range
• Special materials available

Applications

• For the special demands place on temperature control in power plants and in the process industry

Nominal Diameter: DN 150-1200 / NPS 6-48

Pressure Class: PN 250-400 / Class 150-2500

Product Features

• The spray water cooler (lance design) works with controlled nozzle technology for extremely effective steam cooling
• Spray head with integrated high-performance nozzles.
• Selectable control characteristics for precise temperature control
• A large water vapour pressure difference Delta p is permitted
• Excellent pressure atomization
• Tight shut-off, no leakage in closed position
• High control accuracy over the entire control range
• Tightly closing metallic seat. No leakage in closed position and thus no emptying of the cooling water lines possible.
• Contains the pressure injection nozzle, no additional control valves required
• High operational reliability through the use of simple components, minimal wear and tear
• Excellent control accuracy over the entire control range

Applications

• For steam cooling in power plant applications and for general gas cooling applications with
  water injection

Nominal Diameter: DN 150-1200 / NPS 6-24

Pressure Class:  PN 15-250 / Class 150-1500

Product Features

• Suitable for difficult operating conditions, high quality temperature control and avoidance of temperature shocks (valve and piping)
• Allows cooling operation when all other systems typically fail
• For optimum temperature control close to saturation with a control ratio of up to 100:1
• Ultimate cooler for low-speed steam cooling applications, large bandwidth and small distance/separation to saturation
• The additional cooling water and atomizing steam control valve must be considered in the planning

Applications

• For low speed, highly adjustable desuperheater applications and low saturation separation.

Nominal diameter: DN 150-800 / NPS 6-32

Pressure Class: PN 25-250 / Class 150-1500

Product Features

• Particularly large power range thanks to integrated motive steam cooling system for perfect cooling
• For optimum handling of diffi cult operating conditions, high-quality temperature control and optimum protection against temperature shocks (valve and piping)
• Low-noise, multi-stage design of the throttle body (perforated bushing)
• Screwed cover or self-sealing design
• High quality multi-level perforated bushing design for pressure control and quiet operation
• Special solutions for installation in existing systems possible

Applications

• Steam conversion for high pressure and high temperature reduction, e.g. high pressure to low pressure bypass stations and for process steam conversion

Nominal diameter: DN 25-1200 / NPS 1-48

Pressure Class: PN 40-640 / Class 150-2500

Product Features

• Excellent for small mass fl ows
• The injection cooler has a reduced spray head especially for small pipelines and additionally uses a multi-level control system
• Spray head with integrated high-performance nozzles. Selectable control characteristics for precise temperature control
• Cascade trim design
• High control accuracy over the entire control range
• Tightly closing metallic seat. No leakage in closed position and thus no emptying of the cooling water lines possible.
• No additional control valves required
• High operational reliability through the use of simple components, minimal wear and tear

Applications

• For small boiler and process applications and for the food and beverage industry
• Suitable for small piping applications

Nominal Diameter: DN 50–400 / NPS 2-16

Pressure Class:  PN 16-450 / Class 150-2500