Transmitters / Registers

Set Descending Direction

38 Items

Page
per page
  1. Badger Meter PM-5 and MS-E5XP Signal Transmitters
    The Badger Meter PM5 and MSE5XP mechanical pulse transmitters are designed to be used with Badger Meter's magnetic drive meters including the OP and Disc meter lines. These transmitters are used in metering systems that require pulse closures for recording rate of flow, quantity of flow, liquid feeding, blending and batching. The pulse transmitter provides a scaled electrical pulse signal (switch closure type) for each discrete unit of liquid volume metered. The signal is used to operate instruments and controls. Learn More
    Request a Quote
  2. Badger Meter PFT-1E and PFT-4E Signal Transmitters
    The Badger Meter PFT-1E and PFT-4E are electronic scalable pulse transmitters with AC/DC inputs and outputs. These electronic transmitters can be scaled to almost any pulse rate, allowing recalibration by resetting the scale factor with four rotary switches. The PFT-1E transmitter can be calibrated for use with different size meters simply by re-setting the rotary switches. Learn More
    Request a Quote
  3. Badger Meter EC-A Signal Transmitter
    The Badger Meter EC-A electric contacting register is used on Badger Meter Disc and Turbo meters to provide an electric pulse output for a given quantity of liquid metered. In a typical ap¬plication, the pulses would be transmitted to a chemical feed pump for boiler makeup water or for cooling towers. The top portion of the EC-A unit consists of a register with a non-resettable totalizer. Learn More
    Request a Quote
  4. Badger Meter MS-E1 and MS-ER1 Signal Transmitter
    The Badger Meter MS-E1 and MS-ER1 are mechanical transmitters that provide a scaled electrical pulse signals (switch closure type) for each discrete unit of liquid volume metered. The signal is used to operate instruments and controls. Because of the simplicity of these transmitters, maintenance procedures are minimized, furthermore, the enclosure provides watertight protection and is designed to explosion-proof specifications. Learn More
    Request a Quote
  5. Badger Meter RTR Signal Transmitter
    The Badger Meter Recordall Transmitter Register (RTR) is a meter mounted scaled pulse totalizer and signal transmitter. The RTR is the main link for all of Badger's meter reading technologies, as well as the connectivity solution of choice in hundreds of mixed-technology systems. Amazingly flexible, featuring a non-proprietary protocol and very low power requirements, RTRs provide years of reliable, accurate readings for a variety of applications. Learn More
    Request a Quote
  6. Badger Meter FT-1, PFT-2 and FT-2XP Signal Transmitters
    The Badger Meter FT-1, PFT-2 and FT-2XP mechanical transmitters are designed for use with Badger's magnetic drive meters. Mounted on the meter, the transmitter can be wired to the PC-100 batch controller, ER-8 and ER-9 registers, or other pulse-operated instruments that have scaling capabilities and that can receive pulses from a reed switch. Typical applications would be chemical batching systems, chemical additive systems, and other applications that require totalizing meter flow and monitoring rate of flow of fluid passing through the flow meter. Learn More
    Request a Quote
  7. Badger Meter FT-1E, PFT-2E and PFT-3E Signal Transmitters
    The Badger Meter FT-1E, PFT-2E and PFT-3E are electronic transmitters with unscaled pulse outputs designed for use with Badger Meter's line of industrial turbo, disc, and oscillating piston flow meters. These transmitters incorporate magnetoresistive sensors with open collector NPN transistor outputs. They will interface with Badger's PC100 controller as well as other devices that have similar operating characteristics. Learn More
    Request a Quote
  8. Badger Meter PFT420, PFT420/2 and FT420B Analog Flow Transmitters
    The Badger Meter PFT420, PFT420/2 and FT420B are versatile analog flow transmitters for use with Badger's complete line of flow meters. These solid state units produce a 4-20 mA DC output signal through a two-wire design. They also provide a digital pulse output. The outputs are isolated from power supply negative. The 4-20 mA output signal is directly proportional to the rate of flow through the meter. The signal has excellent linearity, accuracy and repeatability. Learn More
    Request a Quote
  9. Badger Meter EPT-1XP and PEPT-1 Signal Transmitters
    The Badger Meter PEPT-1 and EPT-1 are two-wire electronic, high resolution pulse transmitters designed for use with Badger Meter's Disc and OP meter lines. The EPT-1 utilizes rugged NEMA 4X rated bronze housing suitable for hazardous locations while the PEPT-1 is housed in NEMA 4 rated corrosion resistant plastic. Learn More
    Request a Quote
  10. Badger Meter RCDL Non-Resettable Totalizer
    Well proven basic totalizer used for inventory and process control where totalization is the only functional need of the product. The model RCDL register is available on RCDL disc meters and Industrial Turbo meters. The standard RCDL Register for the RCDL disc meters is designed for metering liquids up to 120° F and is available in several units of measure. Learn More
    Request a Quote
Set Descending Direction

38 Items

Page
per page