Leslie Controls Class GTB Double Seated
In dirty, sticky, and erosive applications, where cage guided valves fail, plug characterization, stem guiding, and balancing effect give the double-seated GTB design the best combination of features necessary to succeed. Since inlet pressure exerts force on the upper and lower plugs, the forces are balanced. This balancing effect reduces the net thrust required to move the plug, allowing for smaller actuators to be used in higher pressure drop applications and resulting in lower overall installation cost and dimensional envelope.
Request a Quote
Availability:
In stock
SKU
LC00400W
In dirty, sticky, and erosive applications, where cage guided valves fail, plug characterization, stem guiding, and balancing effect give the double-seated GTB design the best combination of features necessary to succeed. Since inlet pressure exerts force on the upper and lower plugs, the forces are balanced. This balancing effect reduces the net thrust required to move the plug, allowing for smaller actuators to be used in higher pressure drop applications and resulting in lower overall installation cost and dimensional envelope.
Two Point Guiding
Optional Extended Bonnet
Two Point Guiding
The GTB valve plug is supported and rigidly guided by an upper and lower guide bushings. This two-point guiding provides exceptional stability and minimal valve plug deflection even under high pressure drop conditions, and allows precise control and characterization of fluid.
Field ReversibleThe Equal Percentage V-Port, Equal Percent Contoured, Linear Contoured, and Quick Opening plugs are easily reversed in the field so that either a fail open or closed action can be obtained using the same actuator.
Product Features:- -1 - 16" Valve Sizes
- -Cv Range: 0.1 - 2760
- -ANSI CL 125 - 600
- -End Conn.: RF, RTJ, THD
- -Materials: Cast Iron, WCB, WC9, CF8M
Optional Extended Bonnet
Bonnet options include the standard bolted configuration and extension bonnet for temperatures below 32°F (0°C) and above 450°F (232°C).