Steam Traps, Strainers & Vacuum Breakers

The Model PT25 inverted bucket steam trap with integral strainer and all stainless steel internals is best suited for equipment drains with medium to heavy condensate loads. Intermittent operation. The inverted bucket arrangement operates on the density difference between steam and water, giving a cyclic operation for discharge of the accumulated condensate. High condensate handling capacities even at low pressure, permit the use of small trap sizes to suit many applications. The valve and valve seat are hardened by a special induction hardening process to withstand continuous prolonged operation. Learn More

DESCRIPTION:

FEATURES:

Inverted bucket steam trap with integral strainer and

all stainless steel internals. Best suited for

equipment drains with medium to heavy condensate

loads. Intermittent operation.

The inverted bucket arrangement operates on the

density difference between steam and water, giving

a cyclic operation for discharge of the accumulated

condensate.

High condensate handling capacities even at low

pressure, permit the use of small trap sizes to suit

many applications.

The valve and valve seat are hardened by a special

induction hardening process to withstand

continuous prolonged operation.

Perfect shut-off, no steam loss.

SIZES : ½", ¾", 1", 1½", 2"

CONNECTIONS: Screwed (NPT) / Socket weld /

Flanged (welded on)

INSTALLATION:

The trap should be fitted with the inlet and outlet

connections horizontally in-line. Correct fitment with body

vertical is essential for easymovement of the bucket. Care

must be taken to ensure that the trap level is below the

level of the equipment to be drained. The bypass

arrangement should be above the level of the trap.

Full port isolation valves should be fitted before and after

the trap, to be used when the trap has to be opened for

maintenance.

LIMITINGCONDITIONS:

Max. pressure rating 350 psig

Max. temperature rating 800ºF (½" to 1" size)

650ºF (1½" & 2" size)

Maximum operating back pressure at the outlet

should not exceed 90% of the inlet pressure.

Minimum diff. pressure for

satisfactory operation 1.5 psi

Learn More

The Model PT61 float and thermostatic (integral air vent) steam traps are designed for draining condensate from all types of low and medium pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers and jacketed vessels. Learn More

The Model PT10 thermodynamic steam trap with inbuilt strainer in full stainless steel construction, is best suited for header and main line drains and drip legs. Complete stainless steel construction ensures better mechanical and corrosion resistance properties. Condensate entry below the disc, concentric to the disc / seat ensures a clean and parallel lift of the disc with reference to the seat, eliminating localized wear and tear. Learn More

Inverted bucket steam trap with all stainless steel

internals. Best suited for equipment drains with

medium to heavy condensate loads. Intermittent

operation.

The inverted bucket arrangement operates on the

density difference between steam and water, giving

a cyclic operation for discharge of the accumulated

condensate.

High condensate handling capacities even at low

pressures, permit the use of small trap sizes to suit

many applications.

The valve and valve seat are hardened by a special

induction hardening process to withstand

continuous, prolonged operation.

Perfect shut-off, no steam loss.

 

Sizes: ½", ¾", 1", 1½"

Connections : Screwed (NPT)

 

Max. pressure rating : 250 psig

Max. temperature rating : 428 ºF

Maximum operating back pressure at the outlet

should not exceed 90% of the inlet pressure.

Minimum diff. pressure for

satisfactory operation : 1.5 psi

DESCRIPTION:

FEATURES:

Learn More

The Model PT62 float and thermostatic (internal air vent) steam traps are designed for draining condensate from all types of low and medium pressure steam heating and process equipment. Typical applications include unit heaters, heat exchangers, driers and jacketed vessels. Learn More

The PT31AV air vent is designed to remove air and non-condensible gases from steam systems. The removal of these gases is important for achieving better start-up efficiency and heat transfer in normal running. Learn More

DESCRIPTION:

FEATURES:

Inverted bucket steam trap with all stainless steel

internals. Best suited for equipment drains with

medium to heavy condensate loads. Intermittent

operation.

The inverted bucket arrangement operates on the

density difference between steam and water, giving

a cyclic operation for discharge of the accumulated

condensate.

High condensate handling capacities even at low

pressures, permit the use of small trap sizes to suit

many applications.

The valve and valve seat are hardened by a special

induction hardening process to withstand

continuous, prolonged operation.

Perfect shut-off, no steam loss.

 

SIZES:½", ¾", 1", 1½"

 

CONNECTIONS: Screwed (NPT)

LIMITING CONDITIONS:

Max. pressure rating : 250 psig

Max. temperature rating : 428 ºF

Maximum operating back pressure at the outlet

should not exceed 90% of the inlet pressure.

Minimum diff. pressure for

satisfactory operation : 1.5 psi

 

 

 

 

 

 

Learn More

DESCRIPTION:
FEATURES:
Inverted bucket steam trap with all stainless steel
internals. Best suited for equipment drains with
medium to heavy condensate loads. Intermittent
operation.
The inverted bucket arrangement operates on the
density difference between steam and water, giving
a cyclic operation for discharge of the accumulated
condensate.
High condensate handling capacities even at low
pressures, permit the use of small trap sizes to suit
many applications.
The valve and valve seat are hardened by a special
induction hardening process to withstand
continuous, prolonged operation.
Perfect shut-off, no steam loss.

Sizes ½", ¾", 1", 1½"
Connections Screwed (NPT)

LIMITING CONDITIONS:
Max. pressure rating : 250 psig
Max. temperature rating : 428 ºF
Maximum operating back pressure at the outlet
should not exceed 90% of the inlet pressure.
Minimum diff. pressure for
satisfactory operation : 1.5 psi

Learn More

PE01200W Short Description Learn More