Blancett QuikSert In-line Turbine Flow Meter

The Blancett QuikSert In-line Turbine Flow Meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration. With a unique "between-the-flange" design, the need for mating flanges is eliminated, saving installation time and cost, and allowing for limited space requirements. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and bearings. For fluid models, precision upstream and downstream flow straighteners ensure a high degree of measurement accuracy.

Fluid and gas passes through a turbine, causing the turbine to rotate at a speed proportional to velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pick-up, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.

Product Features:

• Accuracy(Fluid): ±1% of reading for 7/8" and larger meters; ±1% of reading over the upper 70% of the measuring range for 3/8", 1/2" and 3/4" meters
• Accuracy(Gas): ±2% of reading over the specified measuring range
• Repeatability: ±0.1%(Fluid),±0.5%(Gas),
• Operating Temperature: -150 °F to +350 °F (-101 °C to +177 °C) (Fluid Standard); Temperatures to +425 °F (+232 °C) (Fluid with high-temp pick-up); -40 to +330 °F (-40 to +330 °C) (Gas)
• Turndown Ratio: About 10:1
• End Connections: Wafer-style, ASME/ANSI B16.5-1996

Notes:

• The following components must be ordered separately to complete the explosion-proof flow meter package:
  • Standard Mag Pickup, p/n B111109, -150…330° F (-101…165° C)
  • B3000 Explosion-proof Meter Mount Kit, p/n B280-737
  • B3100 Explosion-proof Meter Mount Kit, p/n B280-757
• All K-factors are approximate on literature.
• For meters with dual hubs, CONTACT US FOR PRICING.