Badger Meter FC-5000 Flow Computer, BTU Monitor & Flow Display
The FC-5000 Flow Computer is a microprocessor-driven device designed for flow monitoring. The FC-5000 is designed to be compatible with the complete line of Badger Meter industrial flow meters, creating a solution to totalize and indicate fluid flows. Many years of experience in the industrial market has allowed Badger Meter to incorporate features indispensable in control operations.
Input signal—in the form of sine waves or pulses from open collector transistors or dry contact closures—can be scaled to any unit of measure for totalization and instantaneous rate-of-flow indication. Linearized volumetric flow rate and totals are examples of flow parameters that can be viewed on the panel display or through Modbus communications. Dedicated frequency output channels provide scaled outputs. Additionally, a user-defined smoothing function can be applied for improved stability of the flow readings.When configured with temperature sensor inputs, the FC-5000 can be enabled to utilize proven temperature compensation methodologies that support applications where process temperature varies. This is important because the volumetric quantity and viscosity of the fluid will increase or decrease relative to temperature fluctuations. Additionally, the thermal properties of the fluid can cause the flow meter housing to either expand or contract. Both, unless compensated for, will cause a deviation between recognized and actual flow rates and totals for monitoring configurations that are calibrated using a single reference fluid temperature/viscosity.
- Easy viewing
- Easier navigation and programming
- Higher resolution for improved linearization
- View raw and calculated flow data, as-well-as relay and digital I/O status
- Easier, user friendly installation
- Enable flow and totalization alarms to trigger high, low and outside of range
- Transmit flow or totalization data via dedicated output channels
- Application ruggedness
- Design upgrades and improvements
- Large, Backlit Graphical Display
- Integrated Softkeys and Full Numerical Keypad
- 100 Point Linearization
- Sensor Data Display Screen
- Plug-and-Play Terminals
- User Programmable Relay Configuration
- User Programmable Scaled Outputs
- Robust Enclosure, Keypad and Mechanical Relays
- Replaces Cox 4010/4020 Flow Computers
- Temperature Range: 32...130°F
FC-5000 BTU Monitor
The FC-5000 BTU Monitor provides accurate measurement of power/energy consumption used in closed-loop, hydronic thermal transfer systems, typically found in HVAC sub-metering applications. The FC-5000 product lines are microprocessor-driven devices designed for flow monitoring, while the BTU Monitor expands device capabilities by integrating inputs for fluid temperature data. Instantaneous rate and total energy consumption is achieved, simultaneously, while conforming to EN 1434 calculation standards.
The FC-5000 BTU Monitor is an economical, full-featured and compact unit, compatible with the complete line of Badger Meter industrial flow meters, creating a solution to monitor the effectiveness and efficiencies of hydronic HVAC and other comparable systems. Many years of experience in the industrial market has allowed Badger Meter to incorporate products indispensable for control operations, while promoting sustainability.
FC-5000 Flow Display
The FC-5000 Flow Display is an economical, full-featured and compact unit, compatible with the complete line of Badger Meter industrial flow meters, creating a solution to monitor flow rates and totals. Many years of experience in the industrial market has allowed Badger Meter to incorporate products indispensable for control operations, while promoting sustainability.